This weeks classified listings include an AHWI UZM700 mulcher head, Fuelwood Transaw 350 Processor, Ponsse Buffalo forwarder, 2008 Valtra T151e Hi Spec Tractor, Ponsse Fox harvester, Ponsse Wisent forwarder, John Deere 1510e forwarder and a John Deere 1270g harvester
Condition: Used – like new
42,000 +vat
Completely refurbished using all genuine AHWI parts. Latest generation HDT rotor with new (genuine) HDT01 tools/bolts, new rotor end plates and scraper tools, new rotor stub shafts, new bearings/bearing rings/seals, new hydraulic rams/mounting pins/bolts/bushes, new internal wear plates, new chain curtain, new rakes, new hydraulic pipes, vented pulleys and genuine drive belts, strengthened and hard-faced skids, all new bolts and no bad threads. Head is 100% straight and runs perfectly. Gearbox is perfect and has new fully-synthetic gear oil. Some additional performance improvements added as well, to give better finish and reduce wear in abrasive ground. You will need to add only a prop-shaft and hoses between the tractor and the head. SN: 760680803 Head width: 2760mm Rotor width: 2300mm Weight: 4070kg (approximate)
Delivery to UK mainland can be arranged at extra cost. Available now. This head can also be exported to any Worldwide destination. 01376 550989Â enquiries@kingwell-holdings.co.uk
-
That’s a remarkable amount of work hours for a single machine, the Norcar 600 owned by Erkki Rinne is taken well care of, it even has the original Diesel engine.
-
Kieran Anders is a forestry contractor working in the lake district. His work involves hand cutting and extracting timber using a skidder and tractor-trailer forwarder.
-
It is not possible to eliminate chain shot, but there are simple steps that can be taken to reduce the risk.
-
Arwel takes great pride in the fact that the mill has no waste whatsoever, “the peelings are used for children’s playgrounds, gardens and for farm animals in barns in the winter and the sawdust has multiple uses in gardens and farms as well.
-
Timber hauliers need to encourage young blood in, and also look after the hauliers we have, we need make the sector a safe and positive place to work.
FIND US ON
Related Posts
2012 Model Refurbished by Fuelwood  2yrs ago and very little used since.
Tidy Machine in Good working Order
Good work horse
£15k + VAT
Call 01434 230852 for further details
Year 1999
Hours 17,000.00
£20,000.00 + Vat o.n.o.
Ideal Yard Machine
Centre- joint replaced
Back-axle maintenance carried out
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Reverse Drive, 50kmh, Front Linkage
12000 working hours.
Would link up to a forwarding trailer nicely
Asking £25k
Call 01434 230852 for further details
c/w Ponsse H6 Harvesting Head
Year 2018
3576 Hours
Immaculate condition
£245,000.00 + Vat o.n.o.
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Year 2016
Hours 11457
Includes one set of tracks
Fully serviced and ready to go to work
£115,000.00 + Vat o.n.o.
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
c/w John Deere H415 Harvesting Head
Year 2015
12000 Hours
Complete with one set of tracks
Tyres 80%
£165,000.00 + Vat
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Year 2018
4000 Hours
TRS Tyres, 10 Mtr Partless Crane
Machine has been covered by Ponsse Service Plan
£175,000.00 + Vat or nearest offer
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Forest Machine Magazine is written and edited by a forest professional with over 40 years hands on experience. We are dedicated to keeping you informed with all the latest news, views and reviews from our industry.
To support us you can subscribe to our bi-monthly magazine which is delivered to your door from only £30 per year.
Subscribe here
#homeoflogging #writtenbyloggersforloggers #loggingallovertheworld
-
Issue 34£6.00
