Swedish timber harvesting decreased by 6% in 2023 to just under 90 million cubic meters, according to the Norwegian Forestry Agency’s preliminary statistics
Swedish timber harvesting has not been this low in seven years and thus the upward trend of recent years was also broken
According to the Forestry Agency’s preliminary statistics, the gross Swedish timber harvesting in 2023 amounted to 89.6 million cubic meters (cubic meters of forest), to be compared with 2022 when felling landed at 95.0 million cubic meters.
The reason for the reduction is mainly a reduced demand in the wood-consuming industry, especially in the sawmill industry. The reduced production in the sawmills meant that the felling of sawn timber decreased by 10% in 2023, according to Jonas Paulsson, statistician at the Norwegian Forestry Agency.
In the years 2021 and 2022, record fellings were noted, if you ignore 2005 and 2007 when fellings were very high due to the storms Gudrun and Per. The trend with high felling levels was thus broken in 2023 with a reduced felling. The reduction was so great that you need to go back to 2016 to find a lower level.
The reduction was noticeable in all parts of the country. In Norra Norrland and Södra Norrland felling fell by 7%, in Svealand by 6% and in Götaland by 5%. Most of it was harvested in Västra Götaland County. There, felling in 2023 was 8.2 million cubic meters, which was 9 percent of the total felling in the country. Felling was also large in Värmland County, where 8.0 million cubic meters were felled.
Barely 2% of Swedish felling was exported in 2023. Exports decreased in 2023, from 2.0 million cubic meters in 2022 to a preliminary 1.3 million cubic meters in 2023. In 2023, imports of roundwood amounted to a preliminary 7.3 million cubic meters, which is around 0, 8 million cubic meters more than the year before.
-
That’s a remarkable amount of work hours for a single machine, the Norcar 600 owned by Erkki Rinne is taken well care of, it even has the original Diesel engine.
-
Kieran Anders is a forestry contractor working in the lake district. His work involves hand cutting and extracting timber using a skidder and tractor-trailer forwarder.
-
It is not possible to eliminate chain shot, but there are simple steps that can be taken to reduce the risk.
-
Arwel takes great pride in the fact that the mill has no waste whatsoever, “the peelings are used for children’s playgrounds, gardens and for farm animals in barns in the winter and the sawdust has multiple uses in gardens and farms as well.
-
Timber hauliers need to encourage young blood in, and also look after the hauliers we have, we need make the sector a safe and positive place to work.
FIND US ON
Related Posts
Spruce makes up more than half of the felled Swedish timber volume, pine a third and hardwoods around a tenth.
About 68% of the felled volume comes from final felling, 22% from thinning and the rest from other felling.
The average final felling for fellings larger than 0.5 hectares amounted to 3.6 hectares in 2022. The size of the final harvests was on average more than twice as large in Norra Norrland (5.6 hectares) as in Götaland (2.5 hectares). The average area in final felling for individual forest owners is approximately 40% smaller than that of other forest owners.
Forest Machine Magazine is written and edited by a forest professional with over 40 years hands on experience. We are dedicated to keeping you informed with all the latest news, views and reviews from our industry.
To support us you can subscribe to our bi-monthly magazine which is delivered to your door from only £15 per year.
Subscribe here
#homeoflogging #writtenbyloggersforloggers #loggingallovertheworld
