This weeks used equipment for sale includes a Komatsu 840.4 forwarder, HSM 208F forwarder, OSMA mulcher, AHWI mulcher, Dipperfox, Pronar Hook Lift Trailer, Kings tri axle Low Loader Trailer and chippers from Greenmech, Carton, Kwikchip and Mus Max.
Year 2012
14930 Hours
£75,000.00 + Vat o.n.o
Full Service History
Complete with one set of tracks
Brakes and pads on rear of machine recently replaced
Very tidy machine for its age – ready to go to work
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
OSMA TFS160 heavy-duty mulcher head. Swinging hammer drum. Wire cutter. New set of hammers and shafts. Heavy-duty skids. 80mm pin saddle for 20-25 ton machines. Delivery to UK mainland at extra cost.
Tel:01376 550 989
-
That’s a remarkable amount of work hours for a single machine, the Norcar 600 owned by Erkki Rinne is taken well care of, it even has the original Diesel engine.
-
Kieran Anders is a forestry contractor working in the lake district. His work involves hand cutting and extracting timber using a skidder and tractor-trailer forwarder.
-
It is not possible to eliminate chain shot, but there are simple steps that can be taken to reduce the risk.
-
Arwel takes great pride in the fact that the mill has no waste whatsoever, “the peelings are used for children’s playgrounds, gardens and for farm animals in barns in the winter and the sawdust has multiple uses in gardens and farms as well.
-
Timber hauliers need to encourage young blood in, and also look after the hauliers we have, we need make the sector a safe and positive place to work.
FIND US ON
Related Posts
Virtually unused CAT bucket for CAT 299D-3 XHP or similar. Located Braintree if you want to view. Price is plus VAT and delivery. We can ship Worldwide.
Tel:01376 550 989
Used Kwikchip 222MS 7″ Wood Chipper – £5,250 + VAT360 degree Turntable. Year: 2001 Refurbished in 201585 hours (since the refurb) Tel: 01476 568384
Used Carlton SP4012 Stump Grinder – £26,500 + VATCarlton SP4012. 2015 model755hrs. Kubota 45hp turbo diesel. Radio remote. 4WD. Dual wheels. Sandvik cutting wheel. Hydraulic grading blade. Tel: 01476 568384
Used Greenmech 19-28MT50D – £5,995 + VAT. 2006 model. 1300kgs. 190mmx280mm aperture. Tel: 01476 568384
Year 2005
18,000 Hours
£28,000.00 + Vat
No tracks
Regularly serviced
Ready to go to work
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Year 2016
1731 Hours
£140,000.00 + Vat
Shear bar, 3 set of blades and wear plates in spout recently replaced
Good chipper still being used every day and ready to go to work
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
AHWI UZM700 mulcher head for tractors between 240hp and 550hp. Completely refurbished using all genuine AHWI parts. Latest generation HDT rotor with new (genuine) HDT01 tools/bolts, new rotor end plates and scraper tools, new rotor stub shafts, new bearings/bearing rings/seals, new hydraulic rams/mounting pins/bolts/bushes, new internal wear plates, new chain curtain, new rakes, new hydraulic pipes, vented pulleys and genuine drive belts, strengthened and hard-faced skids, all new bolts and no bad threads. Head is 100% straight and runs perfectly. Gearbox is perfect and has new fully-synthetic gear oil. Some additional performance improvements added as well, to give better finish and reduce wear in abrasive ground. You will need to add only a prop-shaft and hoses between the tractor and the head. SN: 760680803 Head width: 2760mm Rotor width: 2300mm Weight: 4070kg (approximate)
Delivery to UK mainland can be arranged at extra cost. Available now. Price is plus VAT. This head can also be exported to any Worldwide destination. Tel:01376 550 989
Dipperfox 850 Pro Demonstrator £19,500 + VAT
Demonstrator for sale. As-new – with 65mm pin saddle and hoses included. Price is plus VAT and delivery. Tel:01376 550 989
Year 2013
£21,000.00 + Vat
44 Tonne Capacity
In very good order – hardly used in the past year.
Ready to go to work
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
17 tonne capacity, Flatbed body
Complete with 3 skeleton chassis (2 x 20ft, 1 x 22ft)
Heavy duty axles, Rear steering axle
Only travelled c. 50 miles since new.
Exceptional condition ready to go to work.
£33,000.00 + Vat
Contact Stephen Clark
Eagle Asset Finance Ltd 07967 588739
Forest Machine Magazine is written and edited by a forest professional with over 40 years hands on experience. We are dedicated to keeping you informed with all the latest news, views and reviews from our industry.
To support us you can subscribe to our bi-monthly magazine which is delivered to your door from only £30 per year.
Subscribe here
#homeoflogging #writtenbyloggersforloggers #loggingallovertheworld
-
Issue 37£6.00
