New Log Max 5000V is a versatile Harvesting Head. It is suitable for a wide selection of base machines and capable of many felling applications. This is a head for those who want the ultimate balance between flexibility, capacity and durability.
Log Max 5000V’s new saw unit 318 MK2 will make your work easier. With careful material choices and new design ideas, the need for maintenance will be minimised, and durability will increase.=
The changes make it easy to change the bar, maintain the saw unit easily, and increase the durability to its maximum.
The Log Max 5000V measurement unit has got mechanical, electronic and hydraulic updates.
- The construction of the measuring wheel cylinder is updated.
- The hydraulic circuit is new.
- The measuring wheel arm and its attachment are reinforced.
- New contactless encoder in the measuring wheel.
- Two conical roller bearings that are lubricated from the outside.
Altogether, the changes will allow the measuring wheel to follow the contour of the stem even better and provide the best measurement result.
The contour of the saw box is changed, and the position of the saw unit has been optimized to handle trees with larger root bones and thus increase production significantly. The saw box also has a root bone plate to protect the chain and bar.
The saw box has also been extended and is now adapted for saw bars of 82 cm. The new 5000V easily handles large trees, both when felling and processing. The maximum cutting diameter is 74 cm.
The Log Max 5000V has new feed roller motors with hoses without banjo fittings. The new engines are of a high-flow model with increased efficiency, generating better performance for the harvesting head.

The changes provide a better and higher flow, which reduces heat development and thus reduces energy losses. It also increases the unit’s feed speed.
The feed wheel arms have also received an updated design to be able to process both coarse and thin logs better.
The hoses for the multi-stemming unit and the rotator control are on the left side of the felling link at 5000V. The updates make the hoses run inside the protective bar, less exposed and will make them last longer.
The attachment for the hoses for stump treatment and grease lubrication also has a new design, which means that the hoses are exposed to minimal wear and have increased durability.
To simplify service, facilitate transport and increase safety, a “Safety Pin” has replaced the safety chain, which forms a locking mechanism between the frame and the felling link. You can now link a bracket under the rotator to a stand in the frame with the help of a locking pin.
To increase durability and productivity, the frame construction of the 5000V has received several updates.
Here are some of the changes:
- The mechanical stops for the feed roller arms in the closed position are reinforced on the inside.
- The lower delimbing knife has received a mechanical stop integrated to the frame.
- The surface of the bottom plate has been reduced by approx. 15% to reduce snow packing.
- The main cover is reinforced to prevent it from being pushed in during snow packing.
-
That’s a remarkable amount of work hours for a single machine, the Norcar 600 owned by Erkki Rinne is taken well care of, it even has the original Diesel engine.
-
Kieran Anders is a forestry contractor working in the lake district. His work involves hand cutting and extracting timber using a skidder and tractor-trailer forwarder.
-
It is not possible to eliminate chain shot, but there are simple steps that can be taken to reduce the risk.
-
Arwel takes great pride in the fact that the mill has no waste whatsoever, “the peelings are used for children’s playgrounds, gardens and for farm animals in barns in the winter and the sawdust has multiple uses in gardens and farms as well.
-
Timber hauliers need to encourage young blood in, and also look after the hauliers we have, we need make the sector a safe and positive place to work.
FIND US ON
Related Posts
Forest Machine Magazine is written and edited by a forest professional with over 40 years hands on experience. We are dedicated to keeping you informed with all the latest news, views and reviews from our industry.
To support us you can subscribe to our bi-monthly magazine which is delivered to your door from only £15 per year.
Subscribe here
#homeoflogging #writtenbyloggersforloggers #loggingallovertheworld
-
1 Year Subscription£0.00
-
2 Year Subscription£0.00
-
Issue 40£0.00
-
Issue 39£0.00
-
Sustainable Logging: Powering The Planet T-Shirt£17.50 – £20.00
-
Sustainable Logging: Powering The Planet Hoodie£33.00 – £36.00