John Deere's New IHC | Forest Machine Magazine

John Deere’s Intelligent Harvester Head Control

John Deere’s new Intelligent Harvester Head Control (IHC) facilitates harvesting and improves delimbing quality. The force control of the delimbing knives maintains proper compression of the harvester head and excellent measuring accuracy in all conditions.

The correct setting of the delimbing knives pressure is a basic requirement for good and precise harvester head operation. Determining the correct settings is based on a number of variables, like tree size, tree species and felling conditions.

Thanks to the new Intelligent Harvester Head Control (IHC), the need for adjustments to knife pressures is significantly reduced, making the harvester operator’s work easier. The force control of the delimbing knives is based on the basic settings per tree species defined in John Deere’s TimberMatic control system.

A force sensor in the harvester head’s upper delimbing knife constantly measures the force with which the tree is compressed, and the IHC system adjusts it, if necessary, within the given limits. This gives the knives sufficient, but not excessive, compression, and thus the quality of both delimbing and measuring remains at a high level.

Ease of use also improves productivity Thanks to this new innovation, the harvester operator doesn’t have to constantly adjust the harvester head settings as tree characteristics or conditions change; instead, IHC adjusts the compression pressure of the delimbing knives as needed.

In addition to ease of use, IHC improves harvesting productivity. Sufficient compression force ensures accurate diameter and length measurement and excellent delimbing quality.

When the compression force is proper and not too excessive, the feed rate remains good, the surface layer of the tree is not damaged, and excessive fuel is not consumed.

Additionally, debarking of the tree doesn’t occur, so the value added remains high and the bark can be recovered for energy.

The correct pressure setting also improves the durability of the harvester head.

IHC – Intelligent Harvester Head Control is a feature that John Deere’s constantly developing.

The option is available with John Deere H212 and H423 harvester heads

80,000 Hours

That’s a remarkable amount of work hours for a single machine, the Norcar 600 owned by Erkki Rinne is taken well care of, it even has the original Diesel engine.
Kieran Anders Forestry

Kieran Anders is a forestry contractor working in the lake district. His work involves hand cutting and extracting timber using a skidder and tractor-trailer forwarder.
Promoting safety in the workplace

It is not possible to eliminate chain shot, but there are simple steps that can be taken to reduce the risk.
Glasfryn Fencing and Sawmill

Arwel takes great pride in the fact that the mill has no waste whatsoever, “the peelings are used for children’s playgrounds, gardens and for farm animals in barns in the winter and the sawdust has multiple uses in gardens and farms as well.
Keeping Timber Hauliers Safe

Timber hauliers need to encourage young blood in, and also look after the hauliers we have, we need make the sector a safe and positive place to work.

FIND US ON

Forest Machine Magazine is written and edited by a forest professional with over 40 years hands on experience. We are dedicated to keeping you informed with all the latest news, views and reviews from our industry.

To support us you can subscribe to our bi-monthly magazine which is delivered to your door from only £15 per year.

Subscribe here

#homeoflogging #writtenbyloggersforloggers #loggingallovertheworld